News

News

新闻中心

News center
/
/
The same blister tray can be used for seven or eight years? Why?

The same blister tray can be used for seven or eight years? Why?

  • Category: News
  • author:
  • source:
  • Release time:2018-10-11 20:19
  • View:

【summary】 The plastic suction tray is also called the plastic inner bracket. It uses the plastic suction technology to make the plastic hard sheets into the plastic with specific grooves. The products are placed in the grooves to protect and beautify the products. There are also transport-type tray packaging, the tray uses more is by the convenience primarily.   Some people can use the same suction tray seven or eight years, some people used less than a year, this is because of? Incorrect use of suction tray. Here's how to use the tray.   Proper use of suction tray:   1. Use at room temperature, do not put down the sun exposure for a long time to avoid causing the aging of plastic suction tray, shorten the service life of plastic suction tray.   2, when placing plastic suction tray should be placed on the flat ground or object surface, do not use violence to avoid landing force uneven, damage.    3,When placing the goods, from the middle to the surrounding evenly placed, should be handled gently, otherwise the force may be uneven and the occurrence of side tilt or overturn, more serious will damage the goods in the case.   4, hydraulic truck and forklift in the use of the process, the fork should be inserted in the middle of the tray, the fork into the fork should be about 2/3 of the depth of the entire suction tray, and the fork should not insert to the end.   5,Hydraulic trucks and forklifts in the use process, should maintain a constant speed, look around, as far as possible to avoid the forklift and goods hit other things, causing plastic tray damage, goods collapse.   6, plastic suction pallet on the shelf, must use the shelf-type plastic suction pallet, can not exceed the load. The height of the center of gravity of the cargo shall not exceed two-thirds of the width of the plastic pallet to ensure safety during transportation.   The correct way to use the tray is to use the suction tray at room temperature and put it under the flat surface, gently handling the goods, can not overload, forklift truck fork in the middle of the tray, do not hit other things, etc. , believe that if you correctly use the suction tray, suction tray life will be greatly extended.

The same blister tray can be used for seven or eight years? Why?

【summary】
The plastic suction tray is also called the plastic inner bracket. It uses the plastic suction technology to make the plastic hard sheets into the plastic with specific grooves. The products are placed in the grooves to protect and beautify the products. There are also transport-type tray packaging, the tray uses more is by the convenience primarily.

 

Some people can use the same suction tray seven or eight years, some people used less than a year, this is because of? Incorrect use of suction tray. Here's how to use the tray.

 

Proper use of suction tray:

 

1. Use at room temperature, do not put down the sun exposure for a long time to avoid causing the aging of plastic suction tray, shorten the service life of plastic suction tray.

 

2, when placing plastic suction tray should be placed on the flat ground or object surface, do not use violence to avoid landing force uneven, damage. 

 

3,When placing the goods, from the middle to the surrounding evenly placed, should be handled gently, otherwise the force may be uneven and the occurrence of side tilt or overturn, more serious will damage the goods in the case.

 

4, hydraulic truck and forklift in the use of the process, the fork should be inserted in the middle of the tray, the fork into the fork should be about 2/3 of the depth of the entire suction tray, and the fork should not insert to the end.

 

5,Hydraulic trucks and forklifts in the use process, should maintain a constant speed, look around, as far as possible to avoid the forklift and goods hit other things, causing plastic tray damage, goods collapse.

 

6, plastic suction pallet on the shelf, must use the shelf-type plastic suction pallet, can not exceed the load. The height of the center of gravity of the cargo shall not exceed two-thirds of the width of the plastic pallet to ensure safety during transportation.

 

The correct way to use the tray is to use the suction tray at room temperature and put it under the flat surface, gently handling the goods, can not overload, forklift truck fork in the middle of the tray, do not hit other things, etc. , believe that if you correctly use the suction tray, suction tray life will be greatly extended.

  • Category: News
  • author:
  • source:
  • Release time:2018-10-11 20:19
  • View:

The plastic suction tray is also called the plastic inner bracket. It uses the plastic suction technology to make the plastic hard sheets into the plastic with specific grooves. The products are placed in the grooves to protect and beautify the products. There are also transport-type tray packaging, the tray uses more is by the convenience primarily.

 

Some people can use the same suction tray seven or eight years, some people used less than a year, this is because of? Incorrect use of suction tray. Here's how to use the tray.

 

Proper use of suction tray:

 

1. Use at room temperature, do not put down the sun exposure for a long time to avoid causing the aging of plastic suction tray, shorten the service life of plastic suction tray.

 

2, When placing plastic suction tray should be placed on the flat ground or object surface, do not use violence to avoid landing force uneven, damage. 

 

3,When placing the goods, from the middle to the surrounding evenly placed, should be handled gently, otherwise the force may be uneven and the occurrence of side tilt or overturn, more serious will damage the goods in the case.

 

4, Hydraulic truck and forklift in the use process, the fork should be inserted in the middle of the tray, the fork into the fork should be about 2/3 of the depth of the entire suction tray, and the fork should not insert to the end.

 

5,Hydraulic trucks and forklifts in the use process, should maintain a constant speed, look around, as far as possible to avoid the forklift and goods hit other things, causing plastic tray damage, goods collapse.

 

6, Plastic suction pallet on the shelf, must use the shelf-type plastic suction pallet, can not exceed the load. The height of the center of gravity of the cargo shall not exceed two-thirds of the width of the plastic pallet to ensure safety during transportation.

 

The correct way to use the tray is to use the suction tray at room temperature and put it under the flat surface, gently handling the goods, can not overload, forklift truck fork in the middle of the tray, do not hit other things, etc. , Believe that if you use the suction tray correctly, suction tray life will be greatly extended.

Contact us

这是描述信息

Phone: 18350920300 (Mr Liu)

Email: gh912@esdtech.cn

Address: Building 1 # B, No.1 Chashan Road, Science and Technology Park, Mawei District, Fuzhou

Message
Copyright © Fuzhou Guanhong New Materials Technology Co.,Ltd All Rights Reserved Powered by saa
Material Characteristic
PC The material surface is good glossiness, good heat resistance, self extinguishing ability, excellent impact performance, small expansion coefficient, stable size, excellent electrical and chemical resistance, good fatigue strength, and complies with the EU ROHS directive and strict UL safety regulations. The UL94 fire rating reaches VTM-0, and there are various surface textures
PP The material is semi transparent, particularly soft, with good toughness and high temperature resistance. It is the main material for food blister tray packaging and can be heated in a microwave oven
ABS Good toughness, high strength, and corrosion resistance
PET Hard texture, good toughness, high strength, bright fur surface, non ignitable, and can reach food grade. Transparent and multi-color sheet materials. Commonly used for blister packaging with high export requirements. Characteristics: PET cannot be hot pressed (high frequency fusion)
PS Low density (light weight), very good plasticity, poor toughness, easy brittleness, and cannot be made into transparent materials. Therefore, it can only be made into base type blisters, as they are prone to cracking, so this type of blister is not suitable for recycling
PVC Commonly used blister materials, with soft texture, strong toughness, and good plasticity, can be made into transparent and various colors, and are commonly used in various electronic, cosmetic, toy and gift blister products